Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Los Angeles, CA
Furnace repair in Los Angeles typically runs between $150 and $650 for most common fixes, with the bulk of repairs landing in the $200 – $400 range. If your furnace is blowing cold air, short cycling, or making noise it shouldn’t, calling (213) 531-5904 gets you a live person who can schedule a same-day visit in most LA neighborhoods. We cover the full scope of Heating & Furnace in Los Angeles work, and furnace repair is the call we take most often between November and February.
Cold Harbour Heating and Air Los Angeles is an independently owned and operated member of the Kingswell network, founded in 2003. Every repair we perform comes with a written 365-Day Done Right Promise: if the repair fails within a full year, we return and correct the work at no charge. That guarantee is on paper before the technician leaves your driveway, not after you ask for it.
The name comes from a cold harbour, the roadside shelter where travelers once waited out bad weather. Comfort in any season is the job, and in a city where winter nights dip into the 40s, a furnace that fails in January is a problem that can’t wait until morning.
When You Need Furnace Repair
Some furnace problems are obvious. Others give you weeks of warning before they quit entirely. Here’s what we hear most from Los Angeles homeowners when they call us:
- The furnace blows cold or lukewarm air. Often the igniter, flame sensor, or gas valve. In older units we see cracked heat exchangers send warm air but not hot air.
- The system short cycles, meaning it turns on, runs a few minutes, and shuts off. A dirty flame sensor or an overheating limit switch is the usual culprit in units we service from Echo Park to Woodland Hills.
- The burners won’t stay lit. This can be a thermocouple issue on older systems or a control board problem on newer ones. Either way, the furnace won’t heat until it’s addressed.
- You hear banging, popping, or rattling from the furnace cabinet. Expanding ductwork is one thing; a failing blower motor or loose blower wheel is another. The noise tells us a lot before we even open the panel.
- Your gas bill climbed without a matching change in usage. A furnace fighting to stay lit, or a heat exchanger leaking combustion air, burns more fuel for less heat.
- The furnace won’t turn on at all. Before you assume the worst, check the thermostat batteries and the breaker. If those are fine, it’s time to call.
If the furnace is making a smell of gas or you suspect a cracked heat exchanger, shut the system off at the thermostat and call us right away. A cracked heat exchanger can release carbon monoxide into the home. That’s not a repair to defer, and it’s not one to attempt yourself. A trained technician with a combustion analyzer is the only way to confirm it safely.
How Much Does Furnace Repair Cost in Los Angeles?
Furnace repair pricing in Los Angeles varies by the part, the furnace brand, and the age of the unit. We provide a written price before any work begins, so there’s no surprise at the door. Here are the ranges we see most often across LA, parts and labor included:
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Igniter replacement | $150 – $280 | Most common fix on furnaces over 8 years old |
| Flame sensor cleaning or replacement | $120 – $220 | Often solved same visit |
| Thermocouple replacement | $140 – $250 | More common on standing-pilot furnaces |
| Control board replacement | $300 – $650 | Brand and model dependent |
| Blower motor replacement | $350 – $700 | Includes motor, labor, and capacitor check |
| Limit switch replacement | $130 – $240 | Fixes short cycling issues |
| Gas valve replacement | $250 – $500 | Common on Rheem and York furnaces in LA homes |
| Full diagnostic (if no repair is needed) | $89 – $149 | Waived if you proceed with the repair |
What actually drives the price is the part itself and how deep the technician has to go to reach it. A flame sensor on a Bryant furnace in a crawlspace is a different job than the same repair on a Daikin unit in a garage. We explain the difference in plain English before you approve anything. The written estimate is the price. It does not change at the door.
Our Furnace Repair Process
Every furnace repair follows the same straightforward sequence. It’s called The Kingswell Way, and it’s built on five commitments: say the price before the work, show up in the window given, leave the place cleaner than found, put the guarantee in writing, and come back if it fails.
- You call and a live person answers. 24 hours a day, 7 days a week. No voicemail tree, no answering service that takes a message and hopes someone checks it. We log your address, ask what the furnace is doing, and give you an arrival window.
- A background-checked, uniformed technician arrives in that window. You know who’s walking through the door. The tech introduces themself, puts on shoe covers, and asks what you’ve been hearing, smelling, and seeing from the system.
- Diagnostic first, written price second. The technician opens the furnace, tests the sequence of operation, and identifies the failed or failing part. Then you get a written price before a single tool comes out. If you decide not to proceed, the diagnostic fee is all you pay.
- The repair happens with the parts on the truck. Our techs carry common replacement parts for Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard furnaces. Most repairs finish in a single visit.
- The guarantee goes on paper. Before the technician leaves, you receive a written 365-Day Done Right Promise. If that repair fails inside 365 days, we come back and correct the work at no charge. No argument, no fine print, no re-diagnosis fee.
- The job site is left cleaner than we found it. Drop cloths come up, panels go back on, and the work area is swept. If we moved it, we put it back.
Furnace Brands We Repair in Los Angeles
Our technicians are trained to service nine major residential HVAC brands, so the furnace in your home isn’t a mystery to us. In Los Angeles, we regularly work on Rheem units in the San Fernando Valley, York furnaces in the older homes of Eagle Rock and Highland Park, and Daikin systems in newer builds across the Westside. Whatever the brand, the process is the same: diagnose, price in writing, fix, guarantee.
If you’re unsure what brand you have, the data plate inside the front panel will tell you. If you can’t find it, the technician will identify it in the first minute of the diagnostic.
Is It Cheaper to Repair or Replace a Furnace?
If the repair is under $500 and the furnace is under 15 years old, repair is usually the right call, especially if it’s the first significant fix the unit has needed. We use a simple rule: multiply the repair cost by the age of the furnace. If the result is under $5,000, the repair makes financial sense. If it’s over, replacement becomes the more honest recommendation. We’ll tell you plainly when a repair is throwing good money after bad. And if replacement is the answer, we’ll walk you through home comfort options without any pressure.
FAQs – Furnace Repair
Can you come out the same day for a furnace repair in Los Angeles?
In most cases, yes. Our technicians run routes across Los Angeles throughout the day, and we keep open slots for no-heat calls during the cold months. Call (213) 531-5904 and a live person will tell you the earliest available window for your neighborhood.
Do you charge for a furnace repair estimate?
We provide a free estimate when the repair proceeds with us. If you call us out for a diagnostic and choose not to move forward, there’s a diagnostic fee of $89 – $149 depending on your location in Los Angeles. That fee is waived entirely if you approve the repair.
What does the 365-Day Done Right Promise actually cover?
It covers the repair we performed, parts and labor, for a full 365 days from the date of service. If that same repair fails within the year, we return and correct it at no charge. The guarantee is written on paper and handed to you before the technician leaves, not buried in a terms-and-conditions page.
How long does a furnace repair visit take?
Most furnace repairs take between 60 and 90 minutes from arrival to a working system. A control board replacement or blower motor swap can run closer to two hours. You’ll have a firm arrival window before we come, and the technician will tell you what to expect before the work starts.
Do you service all furnace types?
We service natural gas furnaces and electric furnaces, including standard efficiency and high-efficiency condensing units. If you have a heat pump paired with a furnace, we handle that too. Our technicians carry parts for nine major brands and can source specialty parts quickly for less common systems.
Key Takeaways
- Most furnace repairs in Los Angeles cost between $150 and $650, with the majority landing under $400.
- Every repair includes a written 365-Day Done Right Promise. If it fails within the year, we return and fix it free.
- You get a written price before any work begins. That price does not change.
- A live person answers the phone 24/7 at (213) 531-5904.
- Technicians are trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard.
- If you smell gas or suspect a cracked heat exchanger, shut the system off and call immediately. This is a safety issue, not a comfort issue.
Call for Furnace Repair in Los Angeles
If your furnace is down or struggling to keep your Los Angeles home warm, call (213) 531-5904 now. A live person answers around the clock, every day of the year. You’ll get a firm arrival window, a written price before the work starts, and a repair guaranteed in writing for 365 days. Free estimates are available, and there’s no obligation. That’s the way Cold Harbour Heating and Air Los Angeles has done it since 2003.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Los Angeles, serving Los Angeles.