Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Beverly Hills
When your furnace quits on a cold Beverly Hills night, you need a repair company that picks up the phone and gets to your door fast. A typical furnace repair in Beverly Hills runs $150 – $700, depending on what’s failed, and most jobs are finished the same day. Our techs know the heating systems inside these older estates: the gravity furnaces south of Sunset, the radiant loops under original hardwood, the heat pumps bolted to roofs where HOA rules won’t allow anything at ground level. Call (213) 531-5904 and a live person answers, any hour, any day.
Why Cold Harbour Heating and Air Los Angeles Is Beverly Hills’s Preferred Furnace Repair Company
We’ve been fixing furnaces in Beverly Hills long enough to know what the marine layer does to a heat exchanger. Homes within two miles of the ocean get salt-laden air pulling moisture into every seam, and we see the results: coils corroding, burners rusting, blower motors straining against ductwork that was undersized in 1938 and never touched since. Our Furnace Repair techs arrive already knowing the house type, because they’ve worked it before. Victor Mancini, who leads our team, insists on written pricing before any tool comes out. That’s not a sales pitch. It’s the Kingswell Way: say the price, show up in the window, leave the place cleaner than found, put the guarantee in writing, come back if it fails.
We answer the phone with a live person 24 hours a day. No voicemail tree. When a furnace quits at 2 a.m. in the flats, you talk to a dispatcher who knows Beverly Hills zip codes and can route a tech from our Los Angeles office to your street without a callback game.
Styles & brands we work with
Furnace Tune Up in Beverly Hills
A Furnace Tune Up in Beverly Hills starts with what the coastal air has already started eating. We inspect the heat exchanger for hairline cracks, test the capacitor, check the ignitor’s current draw, and look hard at any condenser coil or cabinet that’s been breathing salt for a few winters. The cost runs $80 – $200, and the written report tells you exactly what shape the system is in before you spend anything else. Schedule one before winter, especially if you’re within two miles of the ocean.
Coil corrosion inspection
Salt-laden air pits aluminum fins and eats through steel cabinets fast here. We measure coil temperature drop and inspect for pinhole refrigerant leaks that wouldn’t show in a quick visual once-over. Catching this early on a Beverly Hills estate can save you a full condenser replacement later.
Capacitor and ignitor testing
Furnaces in older Beverly Hills homes cycle more often than newer systems, and that cycling stress kills capacitors and ignitors. We test both with a meter, not a guess. If a capacitor is weak, we show you the reading and hand you a written price to replace it before it strands you on the coldest night of the year.
Emergency Furnace Repair in Beverly Hills
Emergency Furnace Repair in Beverly Hills usually means a heat exchanger crack, a dead blower motor, or a gas valve that won’t open, and it tends to happen after 10 p.m. or on a holiday when the house is full. We run 24-hour emergency call-outs into every Beverly Hills neighborhood, from the Golden Triangle up to the hills off Benedict Canyon and Coldwater. Emergency repair work runs $150 – $700 depending on the part and the access. If a 1930s gravity furnace has failed, we bring a written quote before anything is taken apart, and we do not mark up emergency calls with overtime charges.
Heat exchanger failure
When a heat exchanger cracks on an older Beverly Hills furnace, the danger is real: carbon monoxide moving into finished basements or through octopus ductwork. We check with a combustion analyzer and a CO meter, not a flashlight. If it’s cracked, we shut the furnace down and explain exactly what replacement costs, on paper, before we proceed.
Blower motor and gas valve repair
Undersized ductwork in 1920s and 1950s estates pushes static pressure high, and blower motors burn out under that load. Gas valves on older equipment seize after years of thermal cycling. We keep common blower motor and gas valve parts in stock for same-day fixes, and our 365-Day Done Right Promise covers the repair in writing for a full year.
Trusted Brands We Service in Beverly Hills
Our techs work on Trane, Lennox, Goodman, and Rheem equipment every week, and we stock common parts for all four in our Los Angeles warehouse so we’re not waiting on a distributor when your heat is out. Whether your Beverly Hills estate still runs an original Lennox from the 1990s or a newer Goodman two-stage, the tech who arrives knows the unit’s quirks and carries the right test gear. We don’t steer you toward replacement unless the numbers say so.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Beverly Hills Homes
- Salt-corroded condenser coils and cabinets. Marine air eats aluminum fins and steel housings fast, especially on estates near the ocean. We routinely replace coils here 5 – 7 years earlier than inland.
- Cracked heat exchangers in pre-war gravity furnaces. The original 1930s systems south of Sunset thermal-cycle for 90 years, and eventually they crack. That’s a carbon monoxide risk, not a shrug-it-off issue.
- High static pressure from original ductwork. Thick plaster walls and minimal attic space left these 1920s – 1950s homes with narrow, winding ducts. Blower motors fail early pushing against that resistance.
- Uneven heat across large estates. Single-zone systems from the Eisenhower era don’t match how these homes are lived in now. Bedrooms over garages run cold while entertainment wings overheat, and we correct it with zoning and mini-duct retrofits.
Pricing for Furnace Repair in Beverly Hills, CA
Furnace repair in Beverly Hills runs $150 – $700 for most jobs. A tune-up is $80 – $200. A condenser coil replacement with corrosion-resistant coating runs $650 – $1,200, and that upgrade usually pays for itself here because untreated coils fail years faster in salt air. What moves the price is the part that failed, the age of the furnace, and how hard it is to reach. We hand you a written price before any work starts, and that number does not change at the door. Call (213) 531-5904 for a free estimate.
| Service | Price Range |
|---|---|
| Furnace Tune Up (includes coil corrosion inspection and capacitor test) | $80 – $200 |
| Emergency Furnace Repair (heat exchanger replacement or blower motor repair) | $150 – $700 |
| Condenser coil replacement with corrosion-resistant coating | $650 – $1,200 |
We Also Serve Cities Near Beverly Hills
Our techs run calls into West Hollywood, Culver City, Santa Monica, and Marina del Rey every week. If you’re just outside Beverly Hills and your furnace is down, call and we’ll route a truck. For a full picture of what we do across the region, see Furnace Repair in Beverly Hills and the surrounding service area.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Beverly Hills
Twice a year if you’re within two miles of the ocean, once in early fall and once in early spring. Salt-laden marine air corrodes coils and cabinets fast enough that an annual check misses problems already underway. The coastal zone accelerates corrosion 5 – 7 years ahead of inland equipment, so more frequent inspection is cheap insurance. Call (213) 531-5904 and we’ll get you on the schedule.
Yes, and we do it regularly. Our crew has preserved Spanish Revival facades off Sunset while retrofitting mini-duct high-velocity systems inside original wall cavities and finished basements. The original plaster stays intact because we run small, flexible ducting through existing chases and closets, not by gutting rooms. Call us for a written assessment of your specific layout.
Most repairs run $150 – $700. Salt corrosion does increase the price when it has damaged a coil or cabinet to the point that the part needs replacement rather than repair, which is common near the coast. A corrosion-resistant coated coil replacement runs $650 – $1,200, and it typically lasts far longer than a standard coil in this air. Call (213) 531-5904 for a free onsite estimate.
If the outdoor unit sits within two miles of the ocean and you want to avoid replacing the coil years early, yes. The marine layer deposits salt that pits fins and eats through cabinets, and a coated coil is a standard recommendation here, not an upsell. We’ll show you what the existing coil looks like before we recommend anything. Call us for an inspection.
Short-cycling usually comes from an oversized furnace paired with undersized ductwork, a pattern we see in 1950s estates with thick plaster walls and limited attic runs. The system pushes too much heat into too small a duct path, the high-limit switch trips, and the furnace shuts down early. We correct it with airflow testing and zoning, not by guessing. Call (213) 531-5904 and we’ll diagnose it on site.
If your furnace is down in Beverly Hills, call (213) 531-5904. A live person answers, we route a truck, and you get a written price before the work starts. Cold Harbour Heating and Air Los Angeles backs every repair with the 365-Day Done Right Promise, in writing, every time.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Los Angeles, serving Beverly Hills and the surrounding area.