Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Los Angeles
Furnace repair in Los Angeles typically costs between $175 and $825, and most jobs are completed same-day when you call before noon. Our Furnace Repair crews run routes from the Westside through the Valley and down to South Bay daily, so we’re familiar with the quirks of older LA heating systems. If your furnace is blowing cold air, short-cycling, or making a grinding noise, call (213) 531-5904 and a live person answers, 24 hours a day.
Why Cold Harbour Heating and Air Los Angeles Is Los Angeles’s Preferred Furnace Repair Company
We’re independently owned and operated within the Kingswell network, which means we answer to one standard: a written price before any work starts, a firm arrival window, a clean job site, and a 365-day guarantee on every repair. That guarantee is on paper before our technician leaves your home in Los Angeles.
Victor Mancini leads our Los Angeles crews, and every technician who shows up is background-checked and uniformed. You’ll know exactly who’s walking through your door. We service nine major residential brands, so whether your home in Los Feliz runs a Rheem or your Sherman Oaks place has a Goodman, the tech already knows the system.
Over the years, Los Angeles homeowners have told us the same story: a furnace company quoted one number, then changed it at the door. Or a repair failed within a month and nobody returned the call. We built our whole process to be the opposite. The Kingswell Way means we say the price, show up in the window, and put the guarantee in writing. The name story fits: a cold harbour was a roadside shelter where travelers waited out the weather. Comfort in any season is the job.
Styles & brands we work with
Heating Repair in Los Angeles
Heating repair in Los Angeles covers the mechanical and electrical faults that stop a furnace from producing or distributing warm air, and most homeowners call us when the first cold night arrives and the system won’t fire. In Los Angeles, that first cold snap usually lands in November or December, and our busiest heating repair days follow it. A typical heating repair runs $175 – $825, depending on what failed.
Ignition and gas valve faults
Homes within a few miles of the coast see salt-fog corrosion on burner assemblies and flame sensors more than inland properties do. What starts as a dirty flame sensor often turns into repeated ignition lockouts. We test the full ignition sequence rather than replacing one part and hoping.
Blower and airflow repairs
Older Los Angeles homes, especially pre-war bungalows and mid-century stucco tract houses, frequently run undersized retrofit ductwork. That strains the blower motor and causes limit-switch trips. We measure static pressure on every heating repair call, then match the repair to the duct reality, not the manufacturer’s ideal.
Boiler Repair in Los Angeles
Boiler repair in Los Angeles is less common than furnace repair because most LA homes run forced-air systems, but we do service the boilers that remain in older Hancock Park and West Adams properties. A boiler repair typically costs $175 – $825, and we see far more failures tied to water quality and pressure issues than combustion faults.
Pressure and condensate line problems
Crawlspace boilers in pre-war bungalows pull damp marine-layer air through corroded condensate lines, which trips pressure switches and shuts the boiler down. We clean or replace those lines as standard practice on coastal-call boiler repairs.
Heat exchanger evaluations
Any boiler repair should include a combustion check, and ours always does. A small crack that goes unnoticed becomes a carbon monoxide hazard, which is exactly why we treat heat exchanger inspection as a non-negotiable step, not an add-on. Gas appliances can be dangerous, and this is work for a trained professional, not a DIY attempt.
Trusted Brands We Service in Los Angeles
Our Los Angeles technicians train on nine major residential HVAC brands, and we stock common repair parts for Goodman, Rheem, York, and Daikin locally, so most repairs don’t wait on a warehouse shipment from across the county. A Goodman ignitor in Sherman Oaks shouldn’t take three days to source. We keep what LA homes actually use.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Los Angeles Homes
- Salt-fog corrosion on coastal equipment: Furnace cabinet seams and burner assemblies within about three miles of the ocean rust faster than the same units 10 miles inland. This causes flame sensor faults and ignition lockouts we don’t see in Glendale or Pasadena.
- Crawspace condensation from marine air: Pre-war bungalows in areas like West Adams and Highland Park often have furnaces in tight crawlspaces where damp air corrodes condensate lines and trips pressure switches. The repair is straightforward once the corrosion point is found.
- Thermal cycling cracks in valley heat exchangers: The San Fernando Valley swings from cool damp mornings to 100°F afternoons, and original gravity furnaces retrofitted with high-efficiency blowers crack heat exchangers from that constant expansion and contraction.
- Short-cycling on valley inversion nights: Valley inversions trap cold air low, and undersized retrofitted ducts make blowers work against high static pressure. The result is a furnace that fires, overheats, and shuts off repeatedly on winter nights.
Pricing for Furnace Repair in Los Angeles, CA
Most furnace repairs in Los Angeles run $175 – $825. A simple ignitor replacement lands around $175 – $280, while a blower motor replacement can reach $650 – $825 depending on the unit. Gas valve repairs typically fall between $250 and $500. Heat exchanger repairs are at the upper end and sometimes justify replacement instead, which we’ll tell you honestly. You get a written price before any work begins. Call (213) 531-5904 for a free estimate, and we’ll show you the number on paper before a single tool comes out.
We Also Serve Cities Near Los Angeles
Our crews run daily routes from Furnace Repair in Los Angeles out to Huntington Park, South Gate, Bell, and Lynwood. If you’re in one of those cities, we’ll still get a technician to you fast, and your repair carries the same 365-day written guarantee.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Los Angeles
Living within about 3 miles of the coast means salt-laden marine fog contacts your furnace cabinet and burner assembly far more often than it does inland, and corrosion on flame sensors and cabinet seams becomes a recurring repair need. Our coastal-Los Angeles calls almost always include replacing rusted fasteners with stainless ones and cleaning or replacing the flame sensor. If you’re in Santa Monica, Venice, or San Pedro, ask any technician to check for salt corrosion on every visit. Call (213) 531-5904 and we’ll schedule it.
Valley inversion layers trap cold air near the ground, and homes with undersized retrofit ductwork run blower motors against high static pressure, which trips the limit switch and shuts the furnace down early. The system restarts, overheats again, and repeats. The fix is often a static pressure correction paired with a blower speed adjustment, not a new furnace. We see this pattern constantly in Sherman Oaks, Van Nuys, and North Hollywood. Call (213) 531-5904 for an exact diagnosis.
In most cases, a cracked heat exchanger in a 1950s-era gravity furnace in Los Angeles means replacement, not repair. The part cost plus labor often approaches 60 – 75% of a new system, and older gravity furnaces were never designed for modern efficiency demands. We’ll give you a written repair price and a separate replacement price, then let you choose. Gas heat exchangers can leak carbon monoxide if cracked, so this is not a repair to postpone. Call (213) 531-5904 and we’ll inspect it same-day.
A capacitor test measures whether the small cylinder that gives your blower motor its starting jolt still holds the right charge, and yes, every furnace repair in Los Angeles should include one because our climate’s thermal cycling weakens capacitors faster than in places with stable temperatures. A weak capacitor makes the blower motor draw more amperage, which can burn out the motor entirely. It’s a two-minute test that catches a $300 motor failure before it happens. We include it on every repair call.
SEER2 changed how air conditioners and heat pumps are efficiency-rated, and it affects your furnace repair only if you’re considering a heat pump replacement or a system that works as a matched pair. For a straight furnace repair, a SEER2 rating doesn’t change the parts or the repair process. If our Los Angeles technician finds a furnace that should be replaced rather than repaired, we’ll explain any SEER2 implications in plain English before you sign anything. Call (213) 531-5904 with questions.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Los Angeles, serving Los Angeles since 2003.