Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Burbank
When your furnace quits on a Burbank winter night, you don’t need a call center. You need a technician who knows why a 1952 ranch home in the Magnolia Park district trips its limit switch at 3 a.m., and who carries the ignitor and gas valve parts to fix it on the first visit. Most furnace repairs in Burbank run $150 to $700, and our crews respond across the city within hours, not days. Call (213) 531-5904 and you’ll get a live person on the line, a firm arrival window, and a written price before a single tool leaves the truck.
Cold Harbour Heating and Air Los Angeles has been fixing furnaces in Burbank since 2003. The company operates as an independently owned member of the Kingswell network, and every repair we complete is backed by our 365-Day Done Right Promise: if the repair fails within a full year, we come back and make it right at no charge. The guarantee is written down, handed to you, and honored without argument.
Burbank sits in the San Fernando Valley, where winter nights can dip near freezing even after triple-digit summer days. That swing is hard on furnaces, and it’s why we stock parts for Furnace Repair calls across the city, from the Verdugo foothills to the flats near the airport. The right fix, the first time, with the price in writing.
Why Cold Harbour Heating and Air Los Angeles Is Burbank’s Preferred Furnace Repair Company
Homeowners in Burbank have been calling us for furnace work for over two decades, and the reasons don’t change much. We show up when we say we will. We hand you a written price before the work starts. We leave the job site cleaner than we found it. And if a repair doesn’t hold, we come back free of charge for a full year.
Our technicians are background-checked and uniformed on every visit. You’ll know exactly who is walking through your door, and that person is trained on nine major residential HVAC brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That matters in Burbank, where we see a wide mix of older furnaces still heating homes in the Rancho Equestrian district and newer systems in hillside properties above Glenoaks Boulevard.
Victor Mancini, who leads our team, put it simply: a repair shouldn’t be a gamble. That’s why the Kingswell Way runs through every job we do. Say the price before the work. Show up in the window given. Leave the place cleaner than found. Put the guarantee in writing. Come back if it fails. Those aren’t slogans. They’re how we operate.
Styles & brands we work with
Furnace Tune Up in Burbank
A Furnace Tune Up in Burbank is not a luxury add-on. It’s the single best way to avoid a no-heat night when the Valley cold sets in. Older Burbank furnaces, especially those in 1940s-50s tract homes, accumulate dust and wear that a simple filter change won’t touch. A tune-up costs $80 to $200 and takes about an hour.
What We Check and Adjust
Our tune-up covers the full safety and performance checklist: burner condition, gas pressure, ignitor resistance, flame sensor cleaning, limit switch operation, and blower motor amp draw. In Burbank’s older homes, we pay extra attention to heat exchanger integrity and duct static pressure, because those are the two things that turn a mild issue into a cold night. You get a written report of what we found, and we don’t pay technicians on what they sell. The tune-up is a flat price, and the report is honest.
When Burbank Homeowners Should Schedule
The ideal time for a furnace tune-up in Burbank is early fall, before the first cold snap hits. September through early November is when our schedule fills up for exactly this reason. If your furnace is over 10 years old, or if you noticed weak airflow or short cycling last winter, schedule the tune-up now rather than waiting for the first hard freeze. The $80 to $200 you spend now is a fraction of what a failed ignitor at midnight will cost.
Emergency Furnace Repair in Burbank
Emergency Furnace Repair in Burbank means a live person answers your call at any hour, and a technician is dispatched with the parts likely needed for your specific furnace. When a furnace fails during a cold snap, it’s not an inconvenience. It’s a health and safety concern, especially for older residents and young children. Our team responds 24 hours a day, 7 days a week, with no overtime surcharge and no after-hours runaround.
No-Heat Calls, Handled Fast
Most Burbank no-heat emergencies come down to a handful of culprits: a failed ignitor, a stuck gas valve, a tripped limit switch, or a blower motor that gave out. Our trucks carry the common parts for major brands, so the job is often done on the first visit. The price range for emergency furnace repair in Burbank is the same as standard repair: $150 to $700. The written price comes before any work begins, even at 2 a.m.
When to Call Immediately
If you smell gas, shut off the furnace and call your gas utility first, then call us. If you hear a banging or rattling from the blower compartment, or if the furnace starts and stops repeatedly without satisfying the thermostat, shut it down and call. These are signs of a failing component that can damage the furnace further if left running. A cold house in Burbank is bad enough. A furnace fire is worse. We would rather come out and find a simple fix than have you wait and need a full replacement.
Trusted Brands We Service in Burbank
Our technicians are factory-trained on the furnaces most common in Burbank homes. We regularly service Trane, Lennox, Goodman, and Rheem units, along with Carrier, Bryant, York, Daikin, and American Standard. Because we work on all of them, you don’t need to call a different company when you replace an old furnace with a new one. We also keep common replacement parts in our local parts inventory, which means a dead ignitor or gas valve on a Trane furnace in the Toluca Lake area doesn’t wait for a parts house to open. The part is on the truck, and the repair is done today.
Common Furnace Repair Problems We See in Burbank Homes
- Tripped limit switches from collapsed or undersized ducts. Original slab-embedded ductwork in 1940s-50s tract homes was often sized for smaller furnaces. When a newer, larger furnace is installed, the static pressure climbs and the limit switch trips on cold nights. We address the duct issue, not just the switch.
- Short cycling and cracked heat exchangers from oversized furnaces. A furnace sized by guesswork runs too hot for too short a cycle. The result is uneven temperatures between the front and back bedrooms in sprawling ranch homes, plus accelerated wear on the heat exchanger. We always perform a load calculation before recommending a replacement.
- Ash-clogged burners and coils in hillside neighborhoods. In the Verdugo foothills above Glenoaks, Santa Ana winds blow fine ash into outdoor condenser coils and furnace intakes. That ash restricts airflow and causes repeat high-head pressure trips in late fall, just as the system switches to heating mode.
- Failing capacitors and blower motors in aging systems. Burbank’s summer heat runs air conditioning hard for months. By the time heating season arrives, a marginal capacitor or blower motor may fail under the extra load. A furnace tune-up catches these before they leave you cold on a January night.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Burbank, CA
Furnace repair in Burbank typically falls between $150 and $700, depending on what failed and what’s needed to fix it. A simple flame sensor cleaning or ignitor replacement is on the lower end. A gas valve replacement or blower motor swap lands in the middle. A heat exchanger repair or a blower upgrade for ductwork issues on an older Burbank home runs toward the top.
We give you a written price before any work begins, and that price doesn’t change at the door. The estimate is free, whether we complete the repair on the spot or you take a day to think it over. Call (213) 531-5904 for an exact quote. You’ll know what you’re paying before the first tool comes out.
We Also Serve Cities Near Burbank
Cold Harbour Heating and Air Los Angeles serves Burbank and the surrounding communities. Our crews regularly work in Glendale, West Hollywood, Beverly Hills, and South Pasadena. The same written guarantee, the same live-person phone coverage, and the same upfront pricing apply everywhere we go.
Key Takeaways
- Furnace repair in Burbank runs $150 to $700, with the price written down before any work begins.
- Burbank’s 1940s-50s tract homes often need ductwork fixes, not just a new furnace, to stop repeat failures.
- Every repair is backed by the 365-Day Done Right Promise. If it fails within a year, we return and fix it at no charge.
- Live person answers the phone 24/7 at (213) 531-5904. No voicemail trees, no after-hours runaround.
- Emergency furnace repair in Burbank is available around the clock, with no overtime surcharge.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Burbank
Short cycling in Burbank furnaces is almost always caused by one of two things: an oversized furnace or restricted ductwork. In older tract homes, the original 4-inch ducts were often sized for furnaces around 60k BTU. When a newer, larger unit is installed without addressing the ductwork, the furnace runs hot, trips the limit switch, and shuts down early. A load calculation and a static pressure test will tell us which problem you have. Call (213) 531-5904 and we’ll diagnose it.
Yes. Many Burbank homes have furnaces with original ductwork running through the slab foundation. When those ducts collapse or leak, we can often reroute the supply runs through a low-pitch attic using insulated flex duct, rather than breaking up the floor. That preserves the slab and gets heat flowing evenly again. The cost depends on how much ductwork needs rerouting, but we’ll give you a written price before any work starts.
A cracked heat exchanger often shows up as a furnace that runs but produces weak or intermittent heat, sometimes with a slight odor or visible soot near the burners. More subtle signs include water pooling around the furnace base or carbon monoxide detectors going off. In Burbank’s older furnace inventory, heat exchanger cracks are a leading reason we recommend replacement rather than repair, because a cracked exchanger is a carbon monoxide risk. We’ll inspect it with a combustion analyzer and camera on every tune-up.
SEER2 is the updated efficiency rating standard for HVAC equipment, effective in 2023. It measures cooling efficiency, so it applies to the air conditioning side of your system. If you’re replacing a furnace in Burbank and pairing it with a new AC or heat pump, the SEER2 rating tells you how efficiently the system will cool during the Valley’s brutal summers. Higher SEER2 ratings mean lower summer electric bills, but the best choice for your home depends on a load calculation and your existing ductwork. We’ll walk you through the numbers before you buy.
That cold air at startup is normally the blower pushing room-temperature air through the ducts before the heat exchanger warms up. It’s not a sign of failure on its own. But if the cold air persists for more than a few minutes, or if the furnace never warms the air at all, you likely have a failed ignitor, a stuck gas valve, or a flame sensor that needs cleaning. In Burbank’s older furnaces, a dirty flame sensor is one of the most common causes of a furnace that starts and then blows cold. Call (213) 531-5904 and we’ll have it sorted on the first visit.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Los Angeles, serving Burbank since 2003.